Settings -> Device -> Hauppauge Cordcutter TV -> Info -> IP Address In the myTV app on either iOS or Android, you can find the IP address in Find the IP address of the Cordcutter TV.It takes about 30 seconds for the reset to be complete. Hold the reset button for about 10 seconds before releasing it. Then push and hold the 'reset' button while plugging in the power connector. On the back of Cordcutter TV, unplug the power connector. You can use any Ethernet port on the back of the router except the port which is used to connect to the Internet (most times, this port is marked WAN, so don't use this one). Attach an Ethernet cable from your router to the Cordcutter TV.There are two files: rootfs_yyyyy.tgz and CordcutterTV_zzzzz.update You can find the Cordcutter TV firmware files above. First, download the Cordcutter TV firmware files and unzip them.The following instructions assumes you have the Ethernet cable connecting your Cordcutter TV to the router. The easiest setup is if you connect your Cordcutter TV to the router with an Ethernet cable. You can either use Ethernet from the Cordcutter TV to the router, or Ethernet from the router to the PC. Note: an Ethernet cable is needed when updating the firmware.

Hauppauge hd pvr 2 software update